Routine
July 27, 2026
- Risk factorsItems found out of compliance among the 29 on the state’s inspection form most closely tied to foodborne illness, such as holding temperatures and handwashing. One corrected while the inspector was there still counts.
- 3
- Retail practicesItems 30 and up on the form found out of compliance: cleanliness, equipment, labeling, allergen notices and the like. One corrected while the inspector was there still counts.
- 4
- RepeatViolations the department marks as repeated from an earlier inspection.
- 2
Risk factors 3
- 8
Hands clean and properly washed2-301.14(H)
Observed food employee don on gloves before washing their hands. Food employees shall clean their hands and exposed portions of their arms as specified under § 2-301.12 immediately before engaging in food preparation including working with exposed food, clean equipment and utensils, and unwrapped single-service and single-use articles and: Before donning gloves to initiate a task that involves working with food. Corrected on site with education, food employee washed hands.
- 16
Food-contact surfaces; cleaned and sanitized4-602.11(A)(5)
Observed the following food contact surfaces and/or utensils to be soiled or not clean to sight and touch: blade of the can opener. Equipment and food contact surfaces and utensils shall be cleaned at any time during food operations when contamination may have occurred. Corrected on site can opener was moved to ware washing are to be properly cleaned and sanitized.
- 23
Proper date marking and disposition3-501.18(A)(1)
Observed the following refrigerated, ready-to-eat, tcs food kept beyond the allowable 7 days: Gouda cheese sauce prepped on 7/19/26 and tomatillo salsa prepped on 7/15/2026. Corrected on site PIC discarded food items.
Retail practices 4
- 47
Food and non-food contact surfaces cleanable, properly designed, constructed, and used4-501.11
Observed gasket on the Atosa make table coolers to be cracked and soiled. Equipment is not maintained in a state of good repair. Equipment shall be maintained in good repair, such as doors, seals, hinges, and kick plates kept intact and tight. Replace gaskets on cooler.
- 49
Non-food contact surfaces clean4-601.11(B)(C)
Observed there to be an accumulation of soil residue present on the following non-food contact surfaces: the handles and doors of multiple coolers specifically the Turbo Air freezer, and the large make table cooler closest to the server area. Nonfood contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Provide for nonfood contact surfaces of equipment to be cleaned.
- 55
Physical facilities installed, maintained, and cleaned6-501.12
Observed the floor and the walls in the servers area and in the ware washing area and the floor under equipment throughout the kitchen to be soiled and in need of cleaning. Floors, walls, and ceilings shall be cleaned as often as necessary to keep them clean. Except for cleaning up a spill or other accident, cleaning should be done during periods when the least amount of food is exposed such as after closing. Provide for these floors to be cleaned by the time of the next routine inspection.
- 55
Physical facilities installed, maintained, and cleaned
6-201.11Observed the baseboards/ door casing in the ware washing area to be in a state of disrepair, or not to be smooth and easily cleanable. Except as specified in Section 6-201.14 and except for antislip floor coverings or applications that may be used for safety reasons, floors, floor coverings, walls, wall coverings, and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable.


The inspector’s comments
Core Violations noted on this inspection shall be corrected within 90 calendar days, or by no later than the next routine inspection if no health hazard exists or will result from allowing the extended schedule for compliance. This comment shall serve as a written extended schedule of compliance as agreed upon by the permit/license holder and the regulatory authority.