Routine
September 15, 2026
- Risk factorsItems found out of compliance among the 29 on the state’s inspection form most closely tied to foodborne illness, such as holding temperatures and handwashing. One corrected while the inspector was there still counts.
- 1
- Retail practicesItems 30 and up on the form found out of compliance: cleanliness, equipment, labeling, allergen notices and the like. One corrected while the inspector was there still counts.
- 1
- RepeatViolations the department marks as repeated from an earlier inspection.
- 0
Risk factors 1
- 16
Food-contact surfaces; cleaned and sanitized4-501.114(C)(2)
Quaternary ammonium solution is 0parts per million (ppm) in the three-compartment sink, which is below the minimum ppm to properly sanitize in the (THREE-COMPARTMENT SINK/DISHMACHINE). Provide a quaternary ammonium solution concentration that is indicated by the manufacturer's label to effectively sanitize food-contact surfaces. Worked with PIC to remake the solution using quat tablets. Remade sanitizing solution to measure at 200ppm as the bottle indicated 200-400ppm.
Retail practices 1
- 47
Food and non-food contact surfaces cleanable, properly designed, constructed, and used
4-101.11(B)-(E) Food-contact surface of can opener blade is not durable, corrosion-resistant, nonabsorbent, able to withstand repeated warewashing, smooth, and/or easily cleanable due to having rusted. Food-contact surfaces must be properly designed and constructed, and in good repair.


The inspector’s comments
Core Violations noted on this inspection shall be corrected within 90 calendar days, or by no later than the next routine inspection if no health hazard exists or will result from allowing the extended schedule for compliance. This comment shall serve as a written extended schedule of compliance as agreed upon by the permit/license holder and the regulatory authority.